Six Bend for '96-23 Street Glide | Harley Handlebars

-Designed for the Harley Davidson Batwing Fairing Touring Bikes including Street Glide, Electra Glide, Ultra Classic/Limited and Trike. Will not fit the 23 CVO Model

-Traditional Bends provide a classic custom look combined with superior comfort and handling of your motorcycle

-Manufactured out of T304 ornamental grade Stainless Steel and CNC mandrel bent

-Our hand polished stainless steel finish gives the appearance of chrome but with the durability of stainless. High Gloss black powder coating is from the same supplier used by Harley Davidson

-Notched and slotted for internal wiring only and throttle by wire (TBW). Will also fit non-TBW models

-Specs: 1.25" diameter, 36" tip to tip with 6" pullback. Available in 10",12",14" and 16" rises

-Can be purchased Fully Pre-Wired

-Stock handlebars are 8" tall

-2014-2020 Models: 10" and 12" tall bars can be installed without replacing your brake or clutch. You will need our wire extensions and heated grip extensions if you have heated grips. If you have ABS, 14" can be installed with some simple rerouting of your brake and clutch. 

2021-2023 models: 10" and 12" can be installed with stock brake and clutch. Wire extensions needed and heated grips extensions are needed if applicable. 14" bars will require the clutch cable to be extended or replaced. We offer the +4" overstock clutch extensions. Part# 109812

-2008-2013 Harley Street Glide: 10" can be installed with stock brake, clutch and electrical. Refer to install video below. 12" and taller will require everything to be extended.

If you need to replace your cables, we recommend Dennis Kirk or J&P Cycles. They carry a couple of brands that offer all in one box kits based on your model year and handlebar height